Blog

Stuck RV Slide-Out? Diagnosing Lippert In-Wall (Schwintek) vs. Cable Slide Mechanisms Few camping mishaps cause instant panic quite like an RV slide-out that refuses to budge on departure day. Whether your slide is jammed half-open, running crooked, or failing to make a sound when you hit the rocker switch, resolving the issue starts with knowing which drive system you are working with. Most modern lightweight travel trailers, fifth wheels, and select luxury campers utilize either a Lippert In-Wall (Schwintek) system or a cable-driven slide mechanism (such as the BAL Accu-Slide or Norco system). While both achieve the same goal, their mechanical designs, failure points, and emergency recovery methods are fundamentally different.

DFW Winter RV Prep: How to Prevent Frozen Plumbing and Tank Cracks in North Texas Winter weather across the Dallas-Fort Worth Metroplex is notoriously unpredictable. One afternoon might bring mild 65-degree sunshine, followed hours later by an Arctic cold front that plunges temperatures well below freezing. Because Texas winters are typically short, many owners assume a deep winterization isn't necessary. However, water expands by approximately 9% when it freezes, exerting immense pressure on rigid plumbing lines. In just a few sub-freezing hours, trapped water can split PEX elbows, crack plastic water pump housings, and rupture expensive holding tank dump valves. Whether you store your camper in Alvarado, park it at a resort near Fort Worth, or live in your rig full-time, follow this essential DFW winter prep checklist to keep your plumbing system crack-free.









